Reducing Moisture Absorption in Polypropylene Nanocomposites for Automotive Headlamps Using Hydrophobicity-Modified Graphene/Montmorillonite.

Polypropylene (PP) is used as a housing material in automotive headlamps but can cause fogging as a result of absorbed moisture and temperature differences between the exterior and interior of the housing. In this study, PP was combined with a graphene/montmorillonite hybrid (MMT-G) to yield a nanocomposite with reduced moisture absorption. Crucially, the modified nanofiller had low hydrophilicity and good compatibility with the PP matrix. Notably, the water contact angle of the MMT-G improved by 676%. Furthermore, the maximum moisture absorption of the PP/MMT-G nanocomposites was reduced by up to 11.22% compared to that of commercial PP composites, and the weight of the headlamp housing was decreased by 3.6%. Therefore, the designed nanocomposites are expected to help mitigate headlamp fogging while slightly reducing the housing weight.

Objective analysis of facial bone fracture CT images using curvature measurement in a surface mesh model.

The human facial skeleton consists of multiple segments and causes difficulty during analytic processes. We developed image analysis software to quantify the amount of injury and validate the smooth curvature of the surface after facial bone reduction surgery. Three-dimensional computed tomography images of facial bone were obtained from 40 patients who had undergone open reduction surgery to treat unilateral zygomaticomaxillary fractures. Analytic software was developed based on the discrete curvature of a triangular mesh model. The discrete curvature values were compared before and after surgery using two regions of interest. For the inferior orbital rim, the weighted average of curvature changed from 0.543 ± 0.034 to 0.458 ± 0.042. For the anterior maxilla, the weighted average of curvature changed from 0.596 ± 0.02 to 0.481 ± 0.031, showing a significant decrement (P < 0.05). The curvature was further compared with the unaffected side using the Bray-Curtis similarity index (BCSI). The BCSI of the inferior orbital rim changed from 0.802 ± 0.041 to 0.904 ± 0.015, and that for the anterior maxilla changed from 0.797 ± 0.029 to 0.84 ± 0.025, demonstrating increased similarity (P < 0.05). In computational biology, adequate analytic software is crucial. The newly developed software demonstrated significant differentiation between pre- and postoperative curvature values. Modification of formulas and software will lead to further advancements.

Subungual Osteochondromas of the Toe: Two Case Reports for Diagnosis and Treatment.

Benign cartilaginous tumors, known as chondrogenic tumors, show cartilage components in the microscopic diagnosis. We present two clinical cases with cartilaginous tumors of the toes showing distinctive clinical manifestations. Two juvenile patients visited our outpatient clinic due to tumors with toenail deformities. A 10-year-old girl presented with a palpable mass with a nail deformity on the left third toe. The initial pathology report was soft tissue chondroma until complete resection. Another 15-year-old male patient visited the dermatology department with a toenail deformity and underwent a punch biopsy. The pathology report was fibrosis with myxoid degeneration. Excisional biopsies were performed for both patients. In the operative field, we observed exophytic tumors connected to the distal phalangeal bones. The final pathology reports were subungual osteochondroma on both patients. The specimen exhibited mature bone trabeculae with a focal cartilaginous cap. Benign cartilaginous tumors have a slow, progressive course and do not show significant symptoms. However, tumors in subungual areas are accompanied by toenail deformities and they can cause pain. Their clinical characteristics lead to a delayed diagnosis. Surgeons can be confused between soft tissue and chondrogenic tumors. When they conduct physical examinations, these categories should be considered in the differential diagnosis.

Hygroscopic Behavior of Polypropylene Nanocomposites Filled with Graphene Functionalized by Alkylated Chains.

Owing to stringent international environmental and fuel efficiency requirements for lightweight automotive systems, polymer composites have attracted widespread attention. Polypropylene (PP) is a widely employed commercial polymer because of its lightweight and low cost. In this study, PP nanocomposites were fabricated to reduce the moisture absorption of PP composites in automotive headlamp housings. Alkylated chemically modified graphene (CMG-R) was synthesized to reduce the surface hydrophilicity of graphene and increase compatibility with the PP matrix. Fourier transform-infrared spectroscopy and scanning electron microscopy were performed to analyze the nanofillers. X-ray diffraction was performed to determine the interlayer spacing of the nanofiller resulting from surface treatment. Differential scanning calorimetry was used to analyze the crystallinity of the nanocomposites. The results indicated that the improved hydrophobicity of the nanofiller due to alkylation reduced the maximum moisture absorption of the PP nanocomposites by 15% compared to PP composites. The findings of this study are useful for reducing fogging in automotive headlamps.

A Very Simple Suture Technique for Correction of Primary Multiple Folds in Asian Eyelids.

BACKGROUND: Upper blepharoplasty is 1 of the most popular cosmetic procedures in Asia. As people become older, they develop soft tissue atrophy and multiple folds due to a sunken upper eyelid. Furthermore, people with thin upper eyelid skin are more likely to develop multiple folds, even at a young age. The authors investigated the effectiveness of a transverse mattress suture technique to prevent recurrence during upper blepharoplasty in patients with primary multiple folds. PATIENTS/METHODS: Data on 656 patients with primary multiple folds who underwent upper blepharoplasty from March 2017 to January 2020 were retrospectively reviewed. The authors compared the operative time, patients' satisfaction, panel assessment, and complications according to whether the suture technique was used. RESULTS: Among 656 patients, 228 were lost to follow-up or had incomplete data; therefore, the files of 428 patients were analyzed. In total, 199 patients did not undergo the suture technique, whereas 229 patients did. Statistically significant differences were found between the 2 groups in patients' satisfaction, aesthetic results, and recurrence. However, between-group difference was not significant in terms of symmetry or complications such as hematoma and swelling. CONCLUSIONS: People with thin upper eyelid skin or slightly protruding eyes are more likely to develop multiple folds at a young age, even in their teens or 20s. The authors performed a skin suture during upper blepharoplasty, and then performed a transverse mattress suture on the spots where multiple folds are expected. Patients who underwent the suture technique showed better aesthetic results and a significantly lower recurrence rate.

Oculomics for sarcopenia prediction: a machine learning approach toward predictive, preventive, and personalized medicine.

Aims: Sarcopenia is characterized by a gradual loss of skeletal muscle mass and strength with increased adverse outcomes. Recently, large-scale epidemiological studies have demonstrated a relationship between several chronic disorders and ocular pathological conditions using an oculomics approach. We hypothesized that sarcopenia can be predicted through eye examinations, without invasive tests or radiologic evaluations in the context of predictive, preventive, and personalized medicine (PPPM/3PM). Methods: We analyzed data from the Korean National Health and Nutrition Examination Survey (KNHANES). The training set (80%, randomly selected from 2008 to 2010) data were used to construct the machine learning models. Internal (20%, randomly selected from 2008 to 2010) and external (from the KNHANES 2011) validation sets were used to assess the ability to predict sarcopenia. We included 8092 participants in the final dataset. Machine learning models (XGBoost) were trained on ophthalmological examinations and demographic factors to detect sarcopenia. Results: In the exploratory analysis, decreased levator function (odds ratio [OR], 1.41; P value <0.001), cataracts (OR, 1.31; P value = 0.013), and age-related macular degeneration (OR, 1.38; P value = 0.026) were associated with an increased risk of sarcopenia in men. In women, an increased risk of sarcopenia was associated with blepharoptosis (OR, 1.23; P value = 0.038) and cataracts (OR, 1.29; P value = 0.010). The XGBoost technique showed areas under the receiver operating characteristic curves (AUCs) of 0.746 and 0.762 in men and women, respectively. The external validation achieved AUCs of 0.751 and 0.785 for men and women, respectively. For practical and fast hands-on experience with the predictive model for practitioners who may be willing to test the whole idea of sarcopenia prediction based on oculomics data, we developed a simple web-based calculator application (https://knhanesoculomics.github.io/sarcopenia) to predict the risk of sarcopenia and facilitate screening, based on the model established in this study. Conclusion: Sarcopenia is treatable before the vicious cycle of sarcopenia-related deterioration begins. Therefore, early identification of individuals at a high risk of sarcopenia is essential in the context of PPPM. Our oculomics-based approach provides an effective strategy for sarcopenia prediction. The proposed method shows promise in significantly increasing the number of patients diagnosed with sarcopenia, potentially facilitating earlier intervention. Through patient oculometric monitoring, various pathological factors related to sarcopenia can be simultaneously analyzed, and doctors can provide personalized medical services according to each cause. Further studies are needed to confirm whether such a prediction algorithm can be used in real-world clinical settings to improve the diagnosis of sarcopenia. Supplementary Information: The online version contains supplementary material available at 10.1007/s13167-022-00292-3.

Prediction of Mortality after Burn Surgery in Critically Ill Burn Patients Using Machine Learning Models.

Severe burns may lead to a series of pathophysiological processes that result in death. Machine learning models that demonstrate prognostic performance can be used to build analytical models to predict postoperative mortality. This study aimed to identify machine learning models with the best diagnostic performance for predicting mortality in critically ill burn patients after burn surgery, and then compare them. Clinically important features for predicting mortality in patients after burn surgery were selected using a random forest (RF) regressor. The area under the receiver operating characteristic curve (AUC) and classifier accuracy were evaluated to compare the predictive accuracy of different machine learning algorithms, including RF, adaptive boosting, decision tree, linear support vector machine, and logistic regression. A total of 731 patients met the inclusion and exclusion criteria. The 90-day mortality of the critically ill burn patients after burn surgery was 27.1% (198/731). RF showed the highest AUC (0.922, 95% confidence interval = 0.902-0.942) among the models, with sensitivity and specificity of 66.2% and 93.8%, respectively. The most significant predictors for mortality after burn surgery as per machine learning models were total body surface area burned, red cell distribution width, and age. The RF algorithm showed the best performance for predicting mortality.

Scalp reconstruction using the reverse temporalis muscle flap: a case report.

The scalp is the thickest skin in the body and protects the intracranial structures. The coverage of a large scalp defect is a difficult surgical procedure, the full details of which must be considered prior to the procedure, such as defect size and depth, and various factors related to the patient's general condition. Although a free flap is the recommended surgical procedure to cover large scalp defects, it is a high-risk operation that is not appropriate for all patients. As such, other surgical options must be explored. We present the case of a patient with an ulcer on the scalp after wide excision and split-thickness skin graft for squamous cell cancer. We successfully performed a reverse temporalis muscle flap for this patient.

Mimicry of the plant leaf with a living hydrogel sheet of cellulose nanofibers.

Here, we composite an artificial leaf comprising a transparent hydrogel sheet, vein structures, and a photosynthetic system using cellulose nanofibers (CNFs) which can be produced from a biomass. A simple imprinting using a 3D printed stamp enabled the formation of fluidic channels in the hydrogel, embedding living cells without toxic chemistry or a drying process. Microalgae in the hydrogel grows and proliferates under ambient condition for a long period because of the continuous supply of nutrient from the channels, which is more effective for metabolic bioactivity than a flat sheet cultured in a bulk solution. This mimicry of the plant leaf provides a potential for a whole artificial plant. In addition, the simple fabrication of fluidic channels in the hydrogel can be applied to diverse living organisms, including bacteria, animal, and plant cells.

Influence of Ionomer and Cyanuric Acid on Antistatic, Mechanical, Thermal, and Rheological Properties of Extruded Carbon Nanotube (CNT)/Polyoxymethylene (POM) Nanocomposites.

The electrical properties of carbon-based filler-embedded polymer nanocomposites are essential for various applications such as antistatic and electromagnetic interference (EMI) applications. In this study, the impact of additives (i.e., ethylene-co-acid-co-sodium acid copolymer-based ionomer and cyanuric acid) on the antistatic, mechanical, thermal, and rheological properties of extruded multiwalled carbon nanotube (MWCNT)/polyoxymethylene (POM) nanocomposites were systematically investigated. The effects of each additive and the combination of additives were examined. Despite a slight reduction in mechanical properties, the incorporation of ionomer (coating on CNTs) and/or cyanuric acid (π-π interaction between CNTs and cyanuric acid) into the POM/CNT nanocomposites improved the CNT dispersity in the POM matrix, thereby enhancing electrical properties such as the electrical conductivity (and surface resistance) and electrical conductivity monodispersity. The optimum composition for the highest electrical properties was determined to be POM/1.5 wt% CNT/3.0 wt% ionomer/0.5 wt% cyanuric acid. The nanocomposites with tunable electrical properties are sought after, especially for antistatic and EMI applications such as electronic device-fixing jigs.

Tribological Properties of Polyamide 46/Graphene Nanocomposites.

Polyamide 46 (PA46) is used in various automotive parts because of its excellent heat resistance and mechanical properties. This study aims to improve the frictional properties of PA46 using the lubricating ability of graphene. Nanocomposites are prepared via two mixing methods: Graphene powder is compounded directly with PA46 pellets through a twin-screw extruder, or PA46 powder is added to graphene dispersion for self-adsorption, and subsequently, it is dried and compounded with PA46 through the twin-screw extruder. Application of the nanocomposite in the friction field is evaluated via the pin-on-disk method. The coefficient of friction of the nanocomposite prepared by self-adsorption is lower than that of the nanocomposite prepared by direct compounding. The mechanical properties of the nanocomposite fabricated by self-adsorption are superior to those of other materials. This can be attributed to the uniform dispersion of graphene and the strong attractive force between the PA46 matrix and graphene.

Treatment of a naso-orbito-ethmoid fracture using open reduction and suspension sutures: a case report.

Naso-orbito-ethmoidal (NOE) fractures are complicated fractures of the mid-face. The treatment of NOE fractures is challenging and a comprehensive treatment strategy is required. We introduce a case of NOE fracture treated with open reduction and suspension sutures. A 28-year-old woman presented with a unilateral NOE fracture. To reduce the frontal process of the maxilla, a suspension suture was made by pulling the fragment using a double arm suture via a transcaruncular incision. The suture thread was placed in the horizontal plane. Another suspension suture on the inferior orbital rim assisted reduction procedure, and they passed through the overlying skin. The reduction alignment could be finely adjusted by tightening the transcutaneous suture threads while checking the degree of bone alignment through the subciliary incision. The two suture threads were suspended using a thermoplastic nasal splint. An additional skin incision on the medial canthal area, which would have resulted in a scar, could be avoided. Four months postoperatively, computed tomography showed an accurate and stable reduction. The patient was satisfied with her aesthetic appearance, and functional deficits were not present.

Prognostic Nutritional Index and Major Adverse Cardiac Events After Burn Surgery: A Propensity Score Matching Analysis.

Burn injuries can cause significant malnutrition, leading to cardiovascular impairments. The prognostic nutritional index (PNI) predicts postoperative complications. We evaluated the impact of preoperative PNI on major adverse cardiac events (MACE) after burn surgery. PNI was calculated using the equation, 10×(serum albumin level)+0.005×(total lymphocyte count). Multivariable logistic regression analysis was conducted to evaluate the predictors for MACE at 6 months after burn surgery. Receiver operating characteristic curve and propensity score matching analyses were conducted. Additionally, Kaplan-Meier analysis was conducted to compare postoperative 1-year mortality between MACE and non-MACE groups. MACE after burn surgery occurred in 184 (17.5%) of 1049 patients. PNI, age, American Society of Anesthesiologists physical status, and TBSA burned were significantly related to MACE. The area under the receiver operating characteristic curve of PNI was 0.729 (optimal cutoff value = 35). After propensity score matching, the incidence of MACE in the PNI <35 group was higher than that in the PNI ≥35 group (20.1% vs 9.6%, P < .001). PNI <35 was related to an increased incidence of MACE (odds ratio = 2.373, 95% confidence interval = 1.499-3.757, P < .001). The postoperative 1-year mortality was higher in the MACE group than in the non-MACE group (54.9% vs 9.1%, P < .001). Preoperative PNI was a predictor for MACE after burn surgery. PNI <35 was significantly related to an increased incidence of MACE. Moreover, MACE was related to higher postoperative 1-year mortality.

Primary cutaneous CD4+ small/medium T-cell lymphoma: a case report.

Primary cutaneous CD4+ small/medium T-cell lymphoproliferative disorder is a rare disease characterized by a single mass on the face or upper part of the trunk. It usually presents an asymptomatic and favorable progression, and its histopathologic findings include small and medium-sized lymphoid cells. The authors report a case of primary cutaneous CD4+ small/medium T-cell lymphoproliferative disorder on the forehead. A 51-year-old man presented with a protruding mass on his forehead that the patient had noted 1 month previously. Surgical excision and a permanent biopsy were performed under local anesthesia. Based on the biopsy results, the mass was diagnosed as a primary cutaneous CD4+ small/medium T-cell lymphoproliferative disorder. There was no evidence of recurrence at a 15-month follow-up visit.

Sedimentation history and excess metal deposition in estuarine barrier-island system of the Nakdong River, South Korea.

Human activities, such as dam construction and reclamation, can affect sedimentation rates as well as sediment topography and transport in estuaries such as the Nakdong River Estuary. To investigate the sedimentation history, two sediment cores (1-2 m long) were sampled in tidal flats of the estuary. In addition, surface sediments were collected to study present sedimentation environments that appear to be three environments locally: 1) fine-grained sediment deposition; 2) sediments under stronger hydraulic energy; and 3) sandy sediments with good sorting. At the fine sediment deposition, environmental sensitive fraction of elements (Cu, Pb, As, and Co) show an increased sedimentation flux after the dam construction. On the other hand, organic matter-normalized Pb-210 concentrations in sediment core reveal that marine-originated organic matter is predominant in the upper ~45 cm of sediment layers, indicating a significant change in sedimentation history related to massive sedimentation within the Nakdong River Estuary.

Controlled active exercise after open reduction and internal fixation of hand fractures.

BACKGROUND: Hand fractures can be treated using various operative or nonoperative methods. When an operative technique utilizing fixation is performed, early postoperative mobilization has been advocated. We implemented a protocol involving controlled active exercise in the early postoperative period and analyzed the outcomes. METHODS: Patients who were diagnosed with proximal phalangeal or metacarpal fractures of the second to fifth digits were included (n=37). Minimally invasive open reduction and internal fixation procedures were performed. At 3 weeks postoperatively, controlled active exercise was initiated, with stress applied against the direction of axial loading. The exercise involved pain-free active traction in three positions (supination, neutral, and pronation) between 3 and 5 weeks postoperatively. Postoperative radiographs and range of motion (ROM) in the interphalangeal and metacarpophalangeal joints were analyzed. RESULTS: Significant improvements in ROM were found between 6 and 12 weeks for both proximal phalangeal and metacarpal fractures (P<0.05). At 12 weeks, 26 patients achieved a total ROM of more than 230° in the affected finger. Postoperative radiographic images demonstrated union of the affected proximal phalangeal and metacarpal bones at a 20-week postoperative follow-up. CONCLUSIONS: Minimally invasive open reduction and internal fixation minimized periosteal and peritendinous dissection in hand fractures. Controlled active exercise utilizing pain-free active traction in three different positions resulted in early functional exercise with an acceptable ROM.

Juvenile psammomatoid ossifying fibroma of the maxilla.

Juvenile psammomatoid ossifying fibroma (JPOF) is a rare, benign, fibro-osseous variant of ossifying fibroma. It exhibits short-term rapid growth and has a high recurrence rate. Herein we describe a case of JPOF of the maxilla that was treated via complete excision utilizing an intraoral approach with immediate reconstruction using an iliac bone graft, in conjunction with a comprehensive review of the literature. A 20-year-old man presented with a mass on his right cheek that he reported had been growing over the last 10 months. In that cheek he had noticed fullness and experienced pressure, tenderness, and fluffiness, with no other ophthalmic or dental symptoms. After clinical, radiological, and histological examinations, the diagnosis was confirmed as JPOF. Surgical excision was performed, followed by immediate reconstruction with an autologous iliac cortical and cancellous bone graft harvested from the right iliac crest under general anesthesia. Good cicatrization of the intraoral surgical wounds and right iliac crest were evident. He was monitored for 6 months after the surgery and exhibited appropriate midfacial contour. There were no signs of recurrence or complications.

Bipolar or monopolar electrosurgery in blepharoplasty: A comparison of surgical outcomes and patient satisfaction.

BACKGROUND: An electrosurgery unit (ESU) is the mainstay of bleeding control in blepharoplasty. There are two different types of ESUs: monopolar (m-ESU) and bipolar (b-ESU). AIMS: We used m- and b-ESUs in upper, lower, and combined blepharoplasty and compared their outcomes. PATIENTS/METHODS: In this retrospective file review of 292 blepharoplasty patients, we excluded 14 who were lost to follow-up or had missing data; among the 278 enrolled patients, we recorded operative time, a surgeon panel's score for edema and ecchymosis on the third postoperative day, patients' scores of their satisfaction and inconvenience, and postoperative complications. RESULTS: One hundred thirty-nine patients were included in the m-ESU and b-ESU group. Overall, 105 patients underwent upper blepharoplasty, 77 underwent lower blepharoplasty, and 96 underwent combined blepharoplasty. The total mean operative time in the m-ESU and b-ESU was 67.94 and 62.82 minutes, respectively. This difference was not significant (P > .05). The panel's edema and patient satisfaction and inconvenience scores were significantly better in the b-ESU group (P < .05). There were no significant differences in the panel's ecchymosis score and frequency as well as nature of complications between the m-ESU and b-ESU group (P > .05). CONCLUSIONS: In this cohort of blepharoplasty patients, minimally invasive b-ESUs were efficient in obtaining reliable surgical results with higher satisfaction and lower inconvenience rates of patients than m-ESUs. We would like to recommend the use of b-ESUs in blepharoplasty, especially for plastic surgeons inexperienced in periorbital esthetic surgery.

The Postoperative Changes of Nasal Septum and Maxilla After Alveolar Bone Grafts in Patients With Unilateral Alveolar Cleft.

BACKGROUND: Alveolar clefts give rise to many aesthetic and functional problems among affected patients. Therefore, surgical adjustments of the bony defective anomalies are important. The authors performed secondary bone grafts and analyzed the effects particularly on the nasal septum and maxillary area (midface). METHODS: The patients who had alveolar bone grafts were retrospectively reviewed with pre/postoperative 3-dimensional computed tomography; the measurements included distances between the anterior nasal spine (ANS) and the vertical midline, angles between the nasal septum and the transverse line, and angles between the floor of the pyriform aperture and the transverse line. RESULTS: A total number of 23 patients were finally included in the study. The mean age of the patients was 9.7 ±â€Š1.95 years (range, 7-14 years). The mean distance between the ANS and the vertical midline was 5.3 ±â€Š4.70 mm/4.9 ±â€Š4.15 mm pre/postoperatively, showing the mean paired difference of 0.4 ±â€Š0.89 mm (P < 0.05). The mean angles between the nasal septum and the transverse line and between the floor of the pyriform aperture and the transverse line were 64.5 ±â€Š14.69°/65.9 ±â€Š13.73° and 21.7 ±â€Š8.94°/11.5 ±â€Š7.03° pre/postoperatively, showing the mean paired differences of -1.4 ±â€Š2.78° and 10.1 ±â€Š8.20°, respectively (both P < 0.05). CONCLUSION: The results suggest that secondary alveolar bone grafting has expanded effects on the adjacent midfacial structures.

Clinical Efficacy of Acellular Dermal Matrix Paste in Treating Diabetic Foot Ulcers.

INTRODUCTION: Diabetic foot ulcers (DFUs) are slow to heal because of poor tissue vascularity and regenerative capacity, among various factors. OBJECTIVE: In this study, the authors evaluate the efficacy of applying a paste formulation of acellular dermal matrix (ADM) to DFUs. MATERIALS AND METHODS: Patients with Wagner grade 2 or 3 DFUs (N = 49) received either ADM paste (treatment group; n = 23) or conventional foam dressing (control group; n = 26). All chronic wounds were debrided and irrigated in an attempt to control infection. After paste application, mild compaction was undergone to fill ulcer cavities, and foam dressings were used to cover the surface to absorb any discharge. All DFUs were analyzed with regard to ulcer area, depth, progression, healing rate, and duration to complete healing. RESULTS: At the 60-day primary outcome mark, 56.52% (13/23) of the DFUs in the treatment group were healed, compared with 23.08% (6/26) of DFUs in the control group. Mean rates of wound area resolution in the treatment and control groups were 74.17% ± 30.84% and 51.87% ± 32.81%, respectively (P ⟨ .05), with mean times to heal (within 60 days) of 13.54 ± 9.18 days and 21.5 ± 11.98 days, respectively (P ⟨ .05). There were no serious adverse events in either group, and no complications related to ADM paste application. CONCLUSIONS: The ADM paste effectively enhanced tissue regeneration, shortening ulcer duration and preventing associated complications, while eliminating the need for supplemental ulcer management procedures. The paste formulation of ADM provides a matrix for tissue ingrowth, promoting the healing of DFUs.